Categories | Top100 | New Releases | Coupons

Albatron Drivers

1.Modify "CPU Host Frequency (Mhz)" to 1342.Add "DDR:CPU Ratio" to Turbo Mode item.3. Fixed CPU Vcore show too low on HW Monitor4.Support Hyper Threading FunctionFeatures:Intel Pentium 4 Processor (Willamette/Northwood) Socket 478 with FSB 400/533MHz 3 DDR333/266Memory Slots 6 channel AC 97 Audio 3Com 3C910-A01 LAN 2 ATA100 Channels, up to 4 ATA 100 IDE Devices 6 USB 2.0/1.1 Ports (4 ports by optional cable) Processor Socket 478 Intel Pentium 4 Processor (Willamette/Northwood) 1.4GHz to 3.06GHz FSB 400/533MHzFSB667MHz setting available by overclocking Chipset Intel 845PE/ICH4 3Com 3C910-A01 LAN chip Winbond Smart I/O W83627HF Memory 3 DDR Slots DDR333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 1 bank DIMM2,3 1 bank ) Expansion Slots 1 x AGP 4X slot (Supports AGP card running at 1.5V only) 5 x PCI slots (PCI 2.2 compliant)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Initial ReleaseFeatures:Intel Pentium 4 Processor (Willamette/Northwood) Socket 478 with FSB 400/533MHz 3 DDR333/266Memory Slots 6 channel AC 97 Audio 3Com 3C910-A01 LAN 2 ATA100 Channels, up to 4 ATA 100 IDE Devices 6 USB 2.0/1.1 Ports (4 ports by optional cable) Processor Socket 478 Intel Pentium 4 Processor (Willamette/Northwood) 1.4GHz to 3.06GHz FSB 400/533MHzFSB667MHz setting available by overclocking Chipset Intel 845PE/ICH4 3Com 3C910-A01 LAN chip Winbond Smart I/O W83627HF Memory 3 DDR Slots DDR333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 1 bank DIMM2,3 1 bank ) Expansion Slots 1 x AGP 4X slot (Supports AGP card running at 1.5V only) 5 x PCI slots (PCI 2.2 compliant)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
The BIOS with PX848PV/Pro all version compatible.Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1),2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1. Fixed install Windows98 fail when partition > 8GFeatures:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1),2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Improve memory compatibility.Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1),2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Show L3 cache size and string if L3 cache is found.2.Fixed resume from S3 fail when plug willamette CPU.3.Fixed CPU Ratio can't be change for willamette CPU.Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1),2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Initial Release Version Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1),2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Improve memory compatibility.Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1),2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 12, 2008
The BIOS with PX848PV/Pro all version compatible.Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1),2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 12, 2008
1. Fixed install Windows98 fail when partition > 8GFeatures:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1),2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 12, 2008
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 ......
Site Map | RSS | Links | Terms of Use | Privacy Policy | Software Developer | Submit Product | Refund Policy | About us | Contact us
Security Tools | PDF Tools | Anti Spam | iPhone Video Converter | DVD Converter | E Cigarette | таобао русский