Categories | Top100 | New Releases | Coupons

Albatron Drivers

1. Added "CPU Temperature (inside)" item on BIOS Setup.2. Fixed Remote Installation Services(RIS) function test failMotherboard overview:FeatureIntel Pentium 4 Processor (Willamette/Northwood/Prescott (FMB1.0))Socket 478 with FSB 400/533/800(by overclocking) MHz2 DDR200/266/333/400(by overclocking) Memory Sockets6 channel AC 97 AudioVIA 10/100 Ethernet LAN2 ATA100 Channels, up toProcessorSocket 478 Intel Pentium? 4 Processor (Willamette/Northwood/Prescott (FMB1.0))FSB / Transport400/533/800(by overclocking) MHzChipsetNorth Bridge: Intel 845GVSouth Bridge: Intel ICH4Audio Codec: Realtek ALC655I/O Chip : Winbond W83627HFLAN Chip : VIA 6105 LANMemory2 * DDR SocketsDDR200/266/333/400(by overclocking) NON-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot2 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (2 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection functioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V,to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorMicro-ATX (244mm x 230mm) It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Fixed can't show cpu change string when changes into same cpuid CPU.Motherboard overview:FeatureIntel Pentium 4 Processor (Willamette/Northwood/Prescott (FMB1.0))Socket 478 with FSB 400/533/800(by overclocking) MHz2 DDR200/266/333/400(by overclocking) Memory Sockets6 channel AC 97 AudioVIA 10/100 Ethernet LAN2 ATA100 Channels, up toProcessorSocket 478 Intel Pentium? 4 Processor (Willamette/Northwood/Prescott (FMB1.0))FSB / Transport400/533/800(by overclocking) MHzChipsetNorth Bridge: Intel 845GVSouth Bridge: Intel ICH4Audio Codec: Realtek ALC655I/O Chip : Winbond W83627HFLAN Chip : VIA 6105 LANMemory2 * DDR SocketsDDR200/266/333/400(by overclocking) NON-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot2 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (2 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection functioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V,to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorMicro-ATX (244mm x 230mm) It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Fixed safe ratio for prescott FMB1.5.Motherboard overview:FeatureIntel Pentium 4 Processor (Willamette/Northwood/Prescott (FMB1.0))Socket 478 with FSB 400/533/800(by overclocking) MHz2 DDR200/266/333/400(by overclocking) Memory Sockets6 channel AC 97 AudioVIA 10/100 Ethernet LAN2 ATA100 Channels, up toProcessorSocket 478 Intel Pentium? 4 Processor (Willamette/Northwood/Prescott (FMB1.0))FSB / Transport400/533/800(by overclocking) MHzChipsetNorth Bridge: Intel 845GVSouth Bridge: Intel ICH4Audio Codec: Realtek ALC655I/O Chip : Winbond W83627HFLAN Chip : VIA 6105 LANMemory2 * DDR SocketsDDR200/266/333/400(by overclocking) NON-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot2 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (2 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection functioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V,to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorMicro-ATX (244mm x 230mm) It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Support Celeron D CPU.Motherboard overview:FeatureIntel Pentium 4 Processor (Willamette/Northwood/Prescott (FMB1.0))Socket 478 with FSB 400/533/800(by overclocking) MHz2 DDR200/266/333/400(by overclocking) Memory Sockets6 channel AC 97 AudioVIA 10/100 Ethernet LAN2 ATA100 Channels, up toProcessorSocket 478 Intel Pentium? 4 Processor (Willamette/Northwood/Prescott (FMB1.0))FSB / Transport400/533/800(by overclocking) MHzChipsetNorth Bridge: Intel 845GVSouth Bridge: Intel ICH4Audio Codec: Realtek ALC655I/O Chip : Winbond W83627HFLAN Chip : VIA 6105 LANMemory2 * DDR SocketsDDR200/266/333/400(by overclocking) NON-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot2 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (2 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection functioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V,to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorMicro-ATX (244mm x 230mm) It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Initial Release VersionMotherboard overview:FeatureIntel Pentium 4 Processor (Willamette/Northwood/Prescott (FMB1.0))Socket 478 with FSB 400/533/800(by overclocking) MHz2 DDR200/266/333/400(by overclocking) Memory Sockets6 channel AC 97 AudioVIA 10/100 Ethernet LAN2 ATA100 Channels, up toProcessorSocket 478 Intel Pentium? 4 Processor (Willamette/Northwood/Prescott (FMB1.0))FSB / Transport400/533/800(by overclocking) MHzChipsetNorth Bridge: Intel 845GVSouth Bridge: Intel ICH4Audio Codec: Realtek ALC655I/O Chip : Winbond W83627HFLAN Chip : VIA 6105 LANMemory2 * DDR SocketsDDR200/266/333/400(by overclocking) NON-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot2 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (2 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection functioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V,to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorMicro-ATX (244mm x 230mm) It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Improve Mainboard stabilityFeatures:Intel Pentium 4 Processor (Willamette/Northwood) Socket 478 with FSB 400/533MHz 3 DDR333/266Memory Slots 6 channel AC 97 Audio 3Com 3C910-A01 LAN 2 ATA100 Channels, up to 4 ATA 100 IDE Devices 6 USB 2.0/1.1 Ports (4 ports by optional cable) Processor Socket 478 Intel Pentium 4 Processor (Willamette/Northwood) 1.4GHz to 3.06GHz FSB 400/533MHzFSB667MHz setting available by overclocking Chipset Intel 845PE/ICH4 3Com 3C910-A01 LAN chip Winbond Smart I/O W83627HF Memory 3 DDR Slots DDR333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 1 bank DIMM2,3 1 bank ) Expansion Slots 1 x AGP 4X slot (Supports AGP card running at 1.5V only) 5 x PCI slots (PCI 2.2 compliant)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1. Fixed Remote Installation Services(RIS) function test fail.Features:Intel Pentium 4 Processor (Willamette/Northwood) Socket 478 with FSB 400/533MHz 3 DDR333/266Memory Slots 6 channel AC 97 Audio 3Com 3C910-A01 LAN 2 ATA100 Channels, up to 4 ATA 100 IDE Devices 6 USB 2.0/1.1 Ports (4 ports by optional cable) Processor Socket 478 Intel Pentium 4 Processor (Willamette/Northwood) 1.4GHz to 3.06GHz FSB 400/533MHzFSB667MHz setting available by overclocking Chipset Intel 845PE/ICH4 3Com 3C910-A01 LAN chip Winbond Smart I/O W83627HF Memory 3 DDR Slots DDR333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 1 bank DIMM2,3 1 bank ) Expansion Slots 1 x AGP 4X slot (Supports AGP card running at 1.5V only) 5 x PCI slots (PCI 2.2 compliant)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Fix Hardware Monitor FAN SPEED detect issue.Features:Intel Pentium 4 Processor (Willamette/Northwood) Socket 478 with FSB 400/533MHz 3 DDR333/266Memory Slots 6 channel AC 97 Audio 3Com 3C910-A01 LAN 2 ATA100 Channels, up to 4 ATA 100 IDE Devices 6 USB 2.0/1.1 Ports (4 ports by optional cable) Processor Socket 478 Intel Pentium 4 Processor (Willamette/Northwood) 1.4GHz to 3.06GHz FSB 400/533MHzFSB667MHz setting available by overclocking Chipset Intel 845PE/ICH4 3Com 3C910-A01 LAN chip Winbond Smart I/O W83627HF Memory 3 DDR Slots DDR333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 1 bank DIMM2,3 1 bank ) Expansion Slots 1 x AGP 4X slot (Supports AGP card running at 1.5V only) 5 x PCI slots (PCI 2.2 compliant)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Add Hyper Threading message to detect HT support CPU.2.Fixed System hang on POST while C5.3.Enhance Overclocking ability.Features:Intel Pentium 4 Processor (Willamette/Northwood) Socket 478 with FSB 400/533MHz 3 DDR333/266Memory Slots 6 channel AC 97 Audio 3Com 3C910-A01 LAN 2 ATA100 Channels, up to 4 ATA 100 IDE Devices 6 USB 2.0/1.1 Ports (4 ports by optional cable) Processor Socket 478 Intel Pentium 4 Processor (Willamette/Northwood) 1.4GHz to 3.06GHz FSB 400/533MHzFSB667MHz setting available by overclocking Chipset Intel 845PE/ICH4 3Com 3C910-A01 LAN chip Winbond Smart I/O W83627HF Memory 3 DDR Slots DDR333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 1 bank DIMM2,3 1 bank ) Expansion Slots 1 x AGP 4X slot (Supports AGP card running at 1.5V only) 5 x PCI slots (PCI 2.2 compliant)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Fixed com2 port address assign errorFeatures:Intel Pentium 4 Processor (Willamette/Northwood) Socket 478 with FSB 400/533MHz 3 DDR333/266Memory Slots 6 channel AC 97 Audio 3Com 3C910-A01 LAN 2 ATA100 Channels, up to 4 ATA 100 IDE Devices 6 USB 2.0/1.1 Ports (4 ports by optional cable) Processor Socket 478 Intel Pentium 4 Processor (Willamette/Northwood) 1.4GHz to 3.06GHz FSB 400/533MHzFSB667MHz setting available by overclocking Chipset Intel 845PE/ICH4 3Com 3C910-A01 LAN chip Winbond Smart I/O W83627HF Memory 3 DDR Slots DDR333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 1 bank DIMM2,3 1 bank ) Expansion Slots 1 x AGP 4X slot (Supports AGP card running at 1.5V only) 5 x PCI slots (PCI 2.2 compliant)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 ......
Site Map | RSS | Links | Terms of Use | Privacy Policy | Software Developer | Submit Product | Refund Policy | About us | Contact us
Security Tools | PDF Tools | Anti Spam | iPhone Video Converter | DVD Converter | E Cigarette | таобао русский