Categories | Top100 | New Releases | Coupons

Albatron Drivers

Initial Release VersionFeatures:Intel Pentium 4 Processor(Willamette/Northwood)Socket 478 with FSB 400/533MHz2 DDR333/266 Memory Sockets2 channel AC 97 AudioIntel Pro 10/100 EV LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optionalProcessorSocket 478 Intel Pentium 4 Processor(Willamette/Northwood)FSB / Transport400/533MHz( FSB667MHz setting available by overclocking )ChipsetNorth Bridge : Intel 845GESouth Bridge : Intel ICH4LAN Chip : Intel 82562ET LAN chipI/O Chip:Winbond Smart I/O W83627HFMemory2 DDR Sockets:DDR333/DDR266 unbuffered /None-ECC DDRSDRAM up to 2GBExpansion Slots1 x AGP 4X slot (1.5V only)3 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels(up to 4 ATA 100 IDE devices)Onboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports USB cable optional)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF out header(S/PDIF out cable optional)1 x CPU fan header(1 fan rotation detection function)I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,1x VGA,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Lin-out/MICPower20-pin ATX power connector, 4-pin ATX 12Vpower connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0,Green Suspend to RAM (S3), Suspend to Disk (S4)Wake on keyboard/mouse, Wake onLAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages andtemperature monitoringSpecial FeatureZero Jumper DesignCertificationsFCC, CE, BSMIForm FactorMicro ATX (244mm x 230mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1. Added "CPU Temperature (inside)" item on BIOS Setup.2. Fixed Remote Installation Services(RIS) function test failFeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400MHz2 DDR266/200 Memory Sockets2 channel AC 97 AudioIntel Pro 100 EV LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400 MHzChipsetNorth Bridge : Intel 845GLSouth Bridge : ICH4Audio Codec : Realtek ALC201I / O Chip :Winbond W83627HFLAN Chip : Intel 82562ET LAN chipMemory2 *DDR SocketsDDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot3 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports USB cable optional)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF out header (S/PDIF out cable optional)1 x CPU fan header with fan rotation detection function2I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMI, WHQLForm FactorMicro ATX (244mm x 230mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1. Added "CPU Temperature (inside)" item on BIOS Setup.2. Fixed Remote Installation Services(RIS) function test failFeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400MHz2 DDR266/200 Memory Sockets2 channel AC 97 AudioIntel Pro 100 EV LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400 MHzChipsetNorth Bridge : Intel 845GLSouth Bridge : ICH4Audio Codec : Realtek ALC201I / O Chip :Winbond W83627HFLAN Chip : Intel 82562ET LAN chipMemory2 *DDR SocketsDDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot3 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports USB cable optional)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF out header (S/PDIF out cable optional)1 x CPU fan header with fan rotation detection function2I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMI, WHQLForm FactorMicro ATX (244mm x 230mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Initial ReleaseFeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400MHz2 DDR266/200 Memory Sockets2 channel AC 97 AudioIntel Pro 100 EV LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400 MHzChipsetNorth Bridge : Intel 845GLSouth Bridge : ICH4Audio Codec : Realtek ALC201I / O Chip :Winbond W83627HFLAN Chip : Intel 82562ET LAN chipMemory2 *DDR SocketsDDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot3 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports USB cable optional)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF out header (S/PDIF out cable optional)1 x CPU fan header with fan rotation detection function2I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMI, WHQLForm FactorMicro ATX (244mm x 230mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
# Fixed string from "Auto" to "Default"# Added 'Fixed AGP/PCI Output Freq' item support for PM845 Series# Fixed show number of PCI slots and usb error on DMICFGFeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400MHz2 DDR266/200 Memory Sockets2 channel AC 97 AudioIntel Pro 100 EV LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400 MHzChipsetNorth Bridge : Intel 845GLSouth Bridge : ICH4Audio Codec : Realtek ALC201I / O Chip :Winbond W83627HFLAN Chip : Intel 82562ET LAN chipMemory2 *DDR SocketsDDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot3 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports USB cable optional)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF out header (S/PDIF out cable optional)1 x CPU fan header with fan rotation detection function2I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMI, WHQLForm FactorMicro ATX (244mm x 230mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Initial Release FeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400MHz2 DDR266/200 Memory Sockets2 channel AC 97 AudioIntel Pro 100 EV LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400 MHzChipsetNorth Bridge : Intel 845GLSouth Bridge : ICH4Audio Codec : Realtek ALC201I / O Chip :Winbond W83627HFLAN Chip : Intel 82562ET LAN chipMemory2 *DDR SocketsDDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot3 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports USB cable optional)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF out header (S/PDIF out cable optional)1 x CPU fan header with fan rotation detection function2I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMI, WHQLForm FactorMicro ATX (244mm x 230mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
# Fixed PS2 MOUSE can't wake up when S1~S5 mode.# Fixed INTEL onboard VGA driver can't install under NT4.0# Fixed resume S1 and Re-plug USB MOUSE ,Win98 will hangFeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400MHz2 DDR266/200 Memory Sockets2 channel AC 97 AudioIntel Pro 100 EV LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400 MHzChipsetNorth Bridge : Intel 845GLSouth Bridge : ICH4Audio Codec : Realtek ALC201I / O Chip :Winbond W83627HFLAN Chip : Intel 82562ET LAN chipMemory2 *DDR SocketsDDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot3 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports USB cable optional)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF out header (S/PDIF out cable optional)1 x CPU fan header with fan rotation detection function2I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMI, WHQLForm FactorMicro ATX (244mm x 230mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
# Fixed string from "Auto" to "Default"# Added 'Fixed AGP/PCI Output Freq' item support for PM845 Series# Fixed show number of PCI slots and usb error on DMICFGMotherboard overview:FeatureIntel Pentium 4 Processor (Willamette/Northwood/Prescott (FMB1.0))Socket 478 with FSB 400/533/800(by overclocking) MHz2 DDR200/266/333/400(by overclocking) Memory Sockets6 channel AC 97 AudioVIA 10/100 Ethernet LAN2 ATA100 Channels, up toProcessorSocket 478 Intel Pentium? 4 Processor (Willamette/Northwood/Prescott (FMB1.0))FSB / Transport400/533/800(by overclocking) MHzChipsetNorth Bridge: Intel 845GVSouth Bridge: Intel ICH4Audio Codec: Realtek ALC655I/O Chip : Winbond W83627HFLAN Chip : VIA 6105 LANMemory2 * DDR SocketsDDR200/266/333/400(by overclocking) NON-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot2 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (2 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection functioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V,to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorMicro-ATX (244mm x 230mm) It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Initial Release VersionMotherboard overview:FeatureIntel Pentium 4 Processor (Willamette/Northwood/Prescott (FMB1.0))Socket 478 with FSB 400/533/800(by overclocking) MHz2 DDR200/266/333/400(by overclocking) Memory Sockets6 channel AC 97 AudioVIA 10/100 Ethernet LAN2 ATA100 Channels, up toProcessorSocket 478 Intel Pentium? 4 Processor (Willamette/Northwood/Prescott (FMB1.0))FSB / Transport400/533/800(by overclocking) MHzChipsetNorth Bridge: Intel 845GVSouth Bridge: Intel ICH4Audio Codec: Realtek ALC655I/O Chip : Winbond W83627HFLAN Chip : VIA 6105 LANMemory2 * DDR SocketsDDR200/266/333/400(by overclocking) NON-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot2 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (2 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection functioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V,to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorMicro-ATX (244mm x 230mm) It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Initial Release VersionMotherboard overview:FeatureIntel Pentium 4 Processor (Willamette/Northwood/Prescott (FMB1.0))Socket 478 with FSB 400/533/800(by overclocking) MHz2 DDR200/266/333/400(by overclocking) Memory Sockets6 channel AC 97 AudioVIA 10/100 Ethernet LAN2 ATA100 Channels, up toProcessorSocket 478 Intel Pentium? 4 Processor (Willamette/Northwood/Prescott (FMB1.0))FSB / Transport400/533/800(by overclocking) MHzChipsetNorth Bridge: Intel 845GVSouth Bridge: Intel ICH4Audio Codec: Realtek ALC655I/O Chip : Winbond W83627HFLAN Chip : VIA 6105 LANMemory2 * DDR SocketsDDR200/266/333/400(by overclocking) NON-ECC DDR SDRAM up to 2GBExpansion Slots1 x ADD Card Slot2 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (2 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection functioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45 ,1 x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V,to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorMicro-ATX (244mm x 230mm) It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 ......
Site Map | RSS | Links | Terms of Use | Privacy Policy | Software Developer | Submit Product | Refund Policy | About us | Contact us
Security Tools | PDF Tools | Anti Spam | iPhone Video Converter | DVD Converter | E Cigarette | таобао русский