Categories | Top100 | New Releases | Coupons

Albatron Drivers

1. Fixed install Windows98 fail when partition > 8GFeatures:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio3Com 10/100 Ethernet LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4LAN Chip : 3Com 3C920AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Initial Release VersionFeatures:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio3Com 10/100 Ethernet LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4LAN Chip : 3Com 3C920AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1. Fixed Remote Installation Services(RIS) function test fail.FeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/667 MHz( FSB667MHz setting available by overclocking )3 DDR400/333/266 Memory Sockets(DDR400 by Overclocking)6 channel AC 97 Audio3Com 10/100 Ethernet LAN2 ATA100ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533/667 MHz( FSB667MHz setting available by overclocking )ChipsetNorth Bridge :Intel 845GESouth Bridge : Intel ICH4LAN Chip :3Com 3C910-A01 LAN chipI/O Chip:Winbond Smart I/O W83627HFMemory3 DDR SocketsDDR400/333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot (1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels ( up to 4 ATA 100 IDE devices )Onboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers( 2 fan rotation detectionI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,1xVGA,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12Vpower connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0,Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment,Adjustable Vcore, VAGP, VMemory for overclockingWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGPCertificationsFCC, CE, BSMI, WHQLForm FactorATX (294mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
* Please use VGA driver Ver.3317 with BIOS R1.09 *FeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/667 MHz( FSB667MHz setting available by overclocking )3 DDR400/333/266 Memory Sockets(DDR400 by Overclocking)6 channel AC 97 Audio3Com 10/100 Ethernet LAN2 ATA100ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533/667 MHz( FSB667MHz setting available by overclocking )ChipsetNorth Bridge :Intel 845GESouth Bridge : Intel ICH4LAN Chip :3Com 3C910-A01 LAN chipI/O Chip:Winbond Smart I/O W83627HFMemory3 DDR SocketsDDR400/333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot (1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels ( up to 4 ATA 100 IDE devices )Onboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers( 2 fan rotation detectionI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,1xVGA,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12Vpower connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0,Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment,Adjustable Vcore, VAGP, VMemory for overclockingWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGPCertificationsFCC, CE, BSMI, WHQLForm FactorATX (294mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Add Hyper Threading message to detect HT support CPU.2.Fixed System hang on POST while C5.3.Enhance Overclocking ability.FeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/667 MHz( FSB667MHz setting available by overclocking )3 DDR400/333/266 Memory Sockets(DDR400 by Overclocking)6 channel AC 97 Audio3Com 10/100 Ethernet LAN2 ATA100ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533/667 MHz( FSB667MHz setting available by overclocking )ChipsetNorth Bridge :Intel 845GESouth Bridge : Intel ICH4LAN Chip :3Com 3C910-A01 LAN chipI/O Chip:Winbond Smart I/O W83627HFMemory3 DDR SocketsDDR400/333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot (1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels ( up to 4 ATA 100 IDE devices )Onboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers( 2 fan rotation detectionI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,1xVGA,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12Vpower connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0,Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment,Adjustable Vcore, VAGP, VMemory for overclockingWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGPCertificationsFCC, CE, BSMI, WHQLForm FactorATX (294mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Fix Hardware Monitor FAN SPEED detect issue. FeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/667 MHz( FSB667MHz setting available by overclocking )3 DDR400/333/266 Memory Sockets(DDR400 by Overclocking)6 channel AC 97 Audio3Com 10/100 Ethernet LAN2 ATA100ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533/667 MHz( FSB667MHz setting available by overclocking )ChipsetNorth Bridge :Intel 845GESouth Bridge : Intel ICH4LAN Chip :3Com 3C910-A01 LAN chipI/O Chip:Winbond Smart I/O W83627HFMemory3 DDR SocketsDDR400/333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot (1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels ( up to 4 ATA 100 IDE devices )Onboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers( 2 fan rotation detectionI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,1xVGA,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12Vpower connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0,Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment,Adjustable Vcore, VAGP, VMemory for overclockingWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGPCertificationsFCC, CE, BSMI, WHQLForm FactorATX (294mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Fixed com2 port address assign errorFeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/667 MHz( FSB667MHz setting available by overclocking )3 DDR400/333/266 Memory Sockets(DDR400 by Overclocking)6 channel AC 97 Audio3Com 10/100 Ethernet LAN2 ATA100ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533/667 MHz( FSB667MHz setting available by overclocking )ChipsetNorth Bridge :Intel 845GESouth Bridge : Intel ICH4LAN Chip :3Com 3C910-A01 LAN chipI/O Chip:Winbond Smart I/O W83627HFMemory3 DDR SocketsDDR400/333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot (1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels ( up to 4 ATA 100 IDE devices )Onboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers( 2 fan rotation detectionI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,1xVGA,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12Vpower connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0,Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment,Adjustable Vcore, VAGP, VMemory for overclockingWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGPCertificationsFCC, CE, BSMI, WHQLForm FactorATX (294mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Modify "CPU Host Frequency (Mhz)" to 1342.Add "DDR:CPU Ratio" to Turbo Mode item.3. Fixed CPU Vcore show too low on HW Monitor4.Support Hyper Threading FunctionFeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/667 MHz( FSB667MHz setting available by overclocking )3 DDR400/333/266 Memory Sockets(DDR400 by Overclocking)6 channel AC 97 Audio3Com 10/100 Ethernet LAN2 ATA100ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533/667 MHz( FSB667MHz setting available by overclocking )ChipsetNorth Bridge :Intel 845GESouth Bridge : Intel ICH4LAN Chip :3Com 3C910-A01 LAN chipI/O Chip:Winbond Smart I/O W83627HFMemory3 DDR SocketsDDR400/333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot (1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels ( up to 4 ATA 100 IDE devices )Onboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers( 2 fan rotation detectionI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,1xVGA,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12Vpower connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0,Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment,Adjustable Vcore, VAGP, VMemory for overclockingWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGPCertificationsFCC, CE, BSMI, WHQLForm FactorATX (294mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Initial ReleaseFeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/667 MHz( FSB667MHz setting available by overclocking )3 DDR400/333/266 Memory Sockets(DDR400 by Overclocking)6 channel AC 97 Audio3Com 10/100 Ethernet LAN2 ATA100ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533/667 MHz( FSB667MHz setting available by overclocking )ChipsetNorth Bridge :Intel 845GESouth Bridge : Intel ICH4LAN Chip :3Com 3C910-A01 LAN chipI/O Chip:Winbond Smart I/O W83627HFMemory3 DDR SocketsDDR400/333/DDR266 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot (1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels ( up to 4 ATA 100 IDE devices )Onboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers( 2 fan rotation detectionI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,1xVGA,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12Vpower connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0,Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment,Adjustable Vcore, VAGP, VMemory for overclockingWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGPCertificationsFCC, CE, BSMI, WHQLForm FactorATX (294mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
# Fixed string from "Auto" to "Default"# Added 'Fixed AGP/PCI Output Freq' item support for PM845 Series# Fixed show number of PCI slots and usb error on DMICFGFeatures:Intel Pentium 4 Processor(Willamette/Northwood)Socket 478 with FSB 400/533MHz2 DDR333/266 Memory Sockets2 channel AC 97 AudioIntel Pro 10/100 EV LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optionalProcessorSocket 478 Intel Pentium 4 Processor(Willamette/Northwood)FSB / Transport400/533MHz( FSB667MHz setting available by overclocking )ChipsetNorth Bridge : Intel 845GESouth Bridge : Intel ICH4LAN Chip : Intel 82562ET LAN chipI/O Chip:Winbond Smart I/O W83627HFMemory2 DDR Sockets:DDR333/DDR266 unbuffered /None-ECC DDRSDRAM up to 2GBExpansion Slots1 x AGP 4X slot (1.5V only)3 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 channels(up to 4 ATA 100 IDE devices)Onboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports USB cable optional)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF out header(S/PDIF out cable optional)1 x CPU fan header(1 fan rotation detection function)I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,1x VGA,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Lin-out/MICPower20-pin ATX power connector, 4-pin ATX 12Vpower connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0,Green Suspend to RAM (S3), Suspend to Disk (S4)Wake on keyboard/mouse, Wake onLAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages andtemperature monitoringSpecial FeatureZero Jumper DesignCertificationsFCC, CE, BSMIForm FactorMicro ATX (244mm x 230mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 ......
Site Map | RSS | Links | Terms of Use | Privacy Policy | Software Developer | Submit Product | Refund Policy | About us | Contact us
Security Tools | PDF Tools | Anti Spam | iPhone Video Converter | DVD Converter | E Cigarette | таобао русский