Categories | Top100 | New Releases | Coupons

Albatron Drivers

Please use VGA driver Ver.3317 with BIOS R1.09Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio3Com 10/100 Ethernet LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4LAN Chip : 3Com 3C920AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1. Fixed Remote Installation Services(RIS) function test fail.Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio3Com 10/100 Ethernet LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4LAN Chip : 3Com 3C920AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Fix Hardware Monitor FAN SPEED detect issue. Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio3Com 10/100 Ethernet LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4LAN Chip : 3Com 3C920AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Add Hyper Threading message to detect HT support CPU.2.Fixed System hang on POST while C5.3.Enhance Overclocking ability.Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio3Com 10/100 Ethernet LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4LAN Chip : 3Com 3C920AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Modify "CPU Host Frequency (Mhz)" to 1342.Add "DDR:CPU Ratio" to Turbo Mode item.3. Fixed CPU Vcore show too low on HW Monitor4.Support Hyper Threading FunctionFeatures:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio3Com 10/100 Ethernet LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4LAN Chip : 3Com 3C920AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Fixed com2 port address assign errorFeatures:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio3Com 10/100 Ethernet LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4LAN Chip : 3Com 3C920AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Initial ReleaseFeatures:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio3Com 10/100 Ethernet LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4LAN Chip : 3Com 3C920AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Improve memory compatibility.Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio3Com 10/100 Ethernet LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4LAN Chip : 3Com 3C920AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
The BIOS with PX848PV/Pro all version compatible.Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio3Com 10/100 Ethernet LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4LAN Chip : 3Com 3C920AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Show L3 cache size and string if L3 cache is found.2.Fixed resume from S3 fail when plug willamette CPU.3.Fixed CPU Ratio can't be change for willamette CPU.Features:Intel Pentium 4 Processor (Northwood)Socket 478 with FSB 400/533/800 MHz2 DDR266/333/400 Memory Sockets6 Channel AC97 Audio3Com 10/100 Ethernet LAN2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)ProcessorSocket 478 Intel Pentium 4 Processor (Northwood)FSB / Transport400/533/800 MHzChipsetNorth Bridge : Intel 848PSouth Bridge : Intel ICH4LAN Chip : 3Com 3C920AC97 Audio Codec : Realtek ALC655I/O Chip: Winbond Smart I/O W83627HFMemory2 * DDR Sockets:DDR400/333/DDR266 NON-ECC DDR SDRAM up to 2GBNote 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333Note 3: If the FSB of your CPU is 800 MHz, the memory speed supports DDR 266/333/400Expansion Slots1 x AGP(3.0) 8X slot (1.5V only)5 x PCI slots (PCI 2.3 compliant)IDE / SATA Connectors2 ATA100/66 Channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header ( 1 fan rotation detection function )2 x System fan headers ( 2 fan rotation detection function )2 x 5 pin system panel header (Intel spec)1 x 3 pin Power LED header1 x Front audio header (Intel spec)1 x IrDA header1 x Case Open detection headerI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1xLine-in/Line-out(Speaker Out)/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)CertificationsFCC, CE, BSMIForm FactorATX (305mm x 200mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 ......
Site Map | RSS | Links | Terms of Use | Privacy Policy | Software Developer | Submit Product | Refund Policy | About us | Contact us
Security Tools | PDF Tools | Anti Spam | iPhone Video Converter | DVD Converter | E Cigarette | таобао русский