Categories | Top100 | New Releases | Coupons

Albatron Drivers

Initial Release VersionFeatureIntel Pentium4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/800 MHz(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)3 DDR200/266/333/400 (DDR333/400 by overclocking) Memory Sockets3CProcessorSocket 478 Intel PentiumProcessor (Willamette/Northwood)FSB / Transport400/533/800 MHz(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)ChipsetNorth Bridge : Intel 845ESouth Bridge : Intel ICH4Audio Codec : Realtek ALC650 CodecI/O Chip : Winbond Smart I/O W83627HFLAN Chip : 3Com 3C910-A01 LAN chipMemory3 *DDR SocketsDDR 200/266/333/400 (DDR333/400 by overclocking) NON-ECC DDR SDRAM up to 2GB ( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot ( 1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA66/100 channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection function2 x System fan headers with fan rotation detectioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature2Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemoryWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection canCertificationsFCC, CE, BSMIForm FactorATX (200mm x 294mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1. Support HT 2. Enhance OverclockFeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533MHz3 DDR266/200 Memory Sockets6 channel AC 97 AudioIntel Pro 100 EV LANPromise RAID 0,1 / ATA133 Channels2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533 MHzChipsetNorth Bridge : Intel 845ESouth Bridge : Intel ICH4Audio Codec : Realtek ALC650 CodecI/O Chip : Winbond Smart I/O W83637HFPromise Chip : Promise PDC20276LAN Chip : Intel 82562ET LAN chipMemory3 *DDR SocketsDDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GB ( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot ( 1.5V only )6 x PCI slots (PCI 2.2 compliant)1 x CNR slot (Optional )IDE / SATA Connectors2 ATA100/66 channels, up to 4 ATA 100 IDE devicesPromise ATA133 Channel (Not supporting CD-ROM and ATAPI devices), Promise RAID 0,1/ ATA133Onboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header1 x 4 ports USB cable1 x CD_IN header1 x Smart Card Interface1 x Memory Sticker Interface1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection functiI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignBIOS Mirror Protect BIOS by creating an original mirror image of itselfVoice Genie Voice Troubleshooting system ( four-Language)Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overcloCertificationsFCC, CE, BSMIForm FactorATX (244mm x 305mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
# Fixed dimm CL3 can't boot issue.# Driver pls use: * INF:4.00.1011 * IAA:2.2.0.2128 * Audio:A3.26FeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533MHz3 DDR266/200 Memory Sockets6 channel AC 97 AudioIntel Pro 100 EV LANPromise RAID 0,1 / ATA133 Channels2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533 MHzChipsetNorth Bridge : Intel 845ESouth Bridge : Intel ICH4Audio Codec : Realtek ALC650 CodecI/O Chip : Winbond Smart I/O W83637HFPromise Chip : Promise PDC20276LAN Chip : Intel 82562ET LAN chipMemory3 *DDR SocketsDDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GB ( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot ( 1.5V only )6 x PCI slots (PCI 2.2 compliant)1 x CNR slot (Optional )IDE / SATA Connectors2 ATA100/66 channels, up to 4 ATA 100 IDE devicesPromise ATA133 Channel (Not supporting CD-ROM and ATAPI devices), Promise RAID 0,1/ ATA133Onboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header1 x 4 ports USB cable1 x CD_IN header1 x Smart Card Interface1 x Memory Sticker Interface1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection functiI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignBIOS Mirror Protect BIOS by creating an original mirror image of itselfVoice Genie Voice Troubleshooting system ( four-Language)Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overcloCertificationsFCC, CE, BSMIForm FactorATX (244mm x 305mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
# Beta Version Fixes problem where system could boot from an add-on SCSI card.# This revision includes performance enhancing updates. FeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533MHz3 DDR266/200 Memory Sockets6 channel AC 97 AudioIntel Pro 100 EV LANPromise RAID 0,1 / ATA133 Channels2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0ProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533 MHzChipsetNorth Bridge : Intel 845ESouth Bridge : Intel ICH4Audio Codec : Realtek ALC650 CodecI/O Chip : Winbond Smart I/O W83637HFPromise Chip : Promise PDC20276LAN Chip : Intel 82562ET LAN chipMemory3 *DDR SocketsDDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GB ( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot ( 1.5V only )6 x PCI slots (PCI 2.2 compliant)1 x CNR slot (Optional )IDE / SATA Connectors2 ATA100/66 channels, up to 4 ATA 100 IDE devicesPromise ATA133 Channel (Not supporting CD-ROM and ATAPI devices), Promise RAID 0,1/ ATA133Onboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header1 x 4 ports USB cable1 x CD_IN header1 x Smart Card Interface1 x Memory Sticker Interface1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection functiI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignBIOS Mirror Protect BIOS by creating an original mirror image of itselfVoice Genie Voice Troubleshooting system ( four-Language)Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overcloCertificationsFCC, CE, BSMIForm FactorATX (244mm x 305mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1.Fixed detect CPU FAN R.P.M errorFeatureIntel Pentium4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/800 MHz(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)3 DDR200/266/333/400 (DDR333/400 by overclocking) Memory Sockets3CProcessorSocket 478 Intel PentiumProcessor (Willamette/Northwood)FSB / Transport400/533/800 MHz(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)ChipsetNorth Bridge : Intel 845ESouth Bridge : Intel ICH4Audio Codec : Realtek ALC650 CodecI/O Chip : Winbond Smart I/O W83627HFLAN Chip : 3Com 3C910-A01 LAN chipMemory3 *DDR SocketsDDR 200/266/333/400 (DDR333/400 by overclocking) NON-ECC DDR SDRAM up to 2GB ( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot ( 1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA66/100 channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection function2 x System fan headers with fan rotation detectioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature2Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemoryWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection canCertificationsFCC, CE, BSMIForm FactorATX (200mm x 294mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Initial Release VersionFeatureIntel Pentium4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533/800 MHz(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)3 DDR200/266/333/400 (DDR333/400 by overclocking) Memory Sockets3CProcessorSocket 478 Intel PentiumProcessor (Willamette/Northwood)FSB / Transport400/533/800 MHz(FSB 800 is by overclocking or using 200MHz Clock Frequency CPU)ChipsetNorth Bridge : Intel 845ESouth Bridge : Intel ICH4Audio Codec : Realtek ALC650 CodecI/O Chip : Winbond Smart I/O W83627HFLAN Chip : 3Com 3C910-A01 LAN chipMemory3 *DDR SocketsDDR 200/266/333/400 (DDR333/400 by overclocking) NON-ECC DDR SDRAM up to 2GB ( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot ( 1.5V only)5 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA66/100 channels, up to 4 ATA 66/100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x S/PDIF in/out header (S/PDIF in/out cable optional)1 x CPU fan header with fan rotation detection function2 x System fan headers with fan rotation detectioI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature2Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemoryWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection canCertificationsFCC, CE, BSMIForm FactorATX (200mm x 294mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
# Modify 'Fixed AGP/PCI Output Freq' at 66MHz/33MHz no work# Fixed dimm CL3 can't boot issue.# Fixed intel onboard vga can't installed under WINNT 4.0# Update awdflash.exe to 8.22AFeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533MHz3 DDR266/200 Memory Sockets6 channel AC 97 Audio2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)Integrated 3D GraphProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533 MHzChipsetNorth Bridge : Intel 845GSouth Bridge : Intel ICH4Audio Codec : Realtek ALC650 CodecI/O Chip : Winbond Smart I/O W83637HFMemory3 *DDR SocketsDDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot ( 1.5V only)6 x PCI slots (PCI 2.2 compliant)1 x CNR slot (Optional )IDE / SATA Connectors2 ATA100/66 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x Smart Card Interface1 x Memory Sticker Interface1 x S/PDIF in/out header (S/PDIF in/out cable optional)I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), 1xVGA , 1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclockingWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP cCertificationsFCC, CE, BSMIForm FactorATX (244mm x 305mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1. Fixes problem where BIOS could not fix the AGP/PCI frequencies at 66/33 MHz. 2. Fixes problem where system could boot from an add-on SCSI card. 3. Fixes problem where overclocking caused audio subsystem to become non functFeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533MHz3 DDR266/200 Memory Sockets6 channel AC 97 Audio2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)Integrated 3D GraphProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533 MHzChipsetNorth Bridge : Intel 845GSouth Bridge : Intel ICH4Audio Codec : Realtek ALC650 CodecI/O Chip : Winbond Smart I/O W83637HFMemory3 *DDR SocketsDDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot ( 1.5V only)6 x PCI slots (PCI 2.2 compliant)1 x CNR slot (Optional )IDE / SATA Connectors2 ATA100/66 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x Smart Card Interface1 x Memory Sticker Interface1 x S/PDIF in/out header (S/PDIF in/out cable optional)I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), 1xVGA , 1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclockingWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP cCertificationsFCC, CE, BSMIForm FactorATX (244mm x 305mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
Initial Release VersionFeatureIntel Pentium 4 Processor (Willamette/Northwood)Socket 478 with FSB 400/533MHz3 DDR266/200 Memory Sockets6 channel AC 97 Audio2 ATA100 Channels, up to 4 ATA 100 IDE Devices6 USB 2.0/1.1 Ports (4 ports by optional cable)Integrated 3D GraphProcessorSocket 478 Intel Pentium 4 Processor (Willamette/Northwood)FSB / Transport400/533 MHzChipsetNorth Bridge : Intel 845GSouth Bridge : Intel ICH4Audio Codec : Realtek ALC650 CodecI/O Chip : Winbond Smart I/O W83637HFMemory3 *DDR SocketsDDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot ( 1.5V only)6 x PCI slots (PCI 2.2 compliant)1 x CNR slot (Optional )IDE / SATA Connectors2 ATA100/66 channels, up to 4 ATA 100 IDE devicesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x Smart Card Interface1 x Memory Sticker Interface1 x S/PDIF in/out header (S/PDIF in/out cable optional)I/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), 1xVGA , 1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12V power connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC TimerHardware Monitoring2 FAN sensors, CPU/System voltages and temperature monitoringSpecial FeatureZero Jumper DesignAdjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclockingWatch Dog Timer (auto-reset system when it can not handle overclock configurations)AGP Protection (The AGP Protection can ensure the AGP cCertificationsFCC, CE, BSMIForm FactorATX (244mm x 305mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
# Fixed to detect even more lower speed FAN# * Please use VGA driver Ver.3317 with BIOS R1.09 *FeatureIntel Pentium 4 Processor(Willamette/Northwood)Socket 478 with FSB 400/533/667 MHz( FSB667MHz setting available by overclocking )3 DDR400/333/266 Memory Sockets(DDR400 by Overclocking)6 channel AC 97 AudioIntel Pro 10/100 EV LAN2 SeProcessorSocket 478 Intel Pentium 4 Processor(Willamette/Northwood)FSB / Transport400/533/667 MHz( FSB667MHz setting available by overclocking )ChipsetNorth Bridge : Intel 845PESouth Bridge : Intel ICH4LAN Chip : Intel 82562ET LAN chipI/O Chip: Winbond Smart I/O W83627HFPromise Chip: Promise PDC20376 ControllerMemory3 DDR Sockets:DDR400/333/DDR266 unbuffered /None-ECC DDR SDRAM up to 2GB( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )Expansion Slots1 x AGP 4X slot (1.5V only)6 x PCI slots (PCI 2.2 compliant)IDE / SATA Connectors2 ATA100/66 Channels( up to 4 ATA 100 IDE devices)1ATA133 Channel (Not supporting CD-ROM and ATAPI devices)2 Serial ATA150 Channel, up to 2 Serial ATA150 Hard DrivesOnboard I/O Connectors1 x Floppy Connector2 x USB 2.0/1.1 header (4 ports by optional cable)1 x CD_IN header1 x COM (serial) port header (Optional COM cable)1 x S/PDIF in/out header(S/PDIF in/out cable optional)1 x CPU fan header( 1 fan rotation detection functI/O via Back PanelPS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,1x VGA ,1 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MICPower20-pin ATX power connector, 4-pin ATX 12Vpower connectorBIOS Feature3Mb Flash EEPROMAward BIOS with ACPI, DMI2.0, PnP, WfM2.0,Green Suspend to RAM (S3), Suspend to Disk (S4)Wake on keyboard/mouse, Wake onLAN/RTC TimerHardware Monitoring3 FAN sensors, CPU/System voltages andtemperature monitoringSpecial FeatureZero Jumper DesignBIOS Mirror ? Protect BIOS by creating anoriginal mirror image of itself Voice Genie?Voice Troubleshooting system ( four-Language )Adjustable CPU frequency by 1 MHz increment,Adjustable Vcore, VAGP, VMemoryWatcCertificationsFCC, CE, BSMIForm FactorATX (305mm x 244mm)It is highly recommended to always use the most recent driver version available.Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games.Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.
Last Updated:Feb 13, 2008
1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 ......
Site Map | RSS | Links | Terms of Use | Privacy Policy | Software Developer | Submit Product | Refund Policy | About us | Contact us
Security Tools | PDF Tools | Anti Spam | iPhone Video Converter | DVD Converter | E Cigarette | таобао русский